TM-3 plating thickness gauge is mainly used to locally measure the thickness of plating coatings, such as zinc, cadmium or chromium on steel, and silver or copper on titanium.
The system has 10,000 measurement recording points, a USB interface for connection to a PC, a selection of the average mode of results, and the possibility of programming up to 25 approximate scales from the device's keyboard and personal computer.
In addition, special converters are provided to access hard-to-reach locations (measuring holes, tubes, etc.).
main feature:
Capable of recording up to 25 approximate scales;
Adjustable screen backlight;
Selective averaging
Automatic Alarm Signal System (ASB);
Power: built-in battery;
Automatic shutdown mode;
Possibility to order converters of different configurations;
Weight 230g.
The main technical parameters:
Measuring thickness range: from 0 to 100um (on ferromagnetic or non-ferromagnetic substrate, depending on model)
Reading accuracy: 1, 0.1, 0.01-set during programming
Measurement error: less than 3% of reading
Screen type: Graphic LCD, adjustable backlight and contrast
Screen size (height x width): 21 x 56mm
Memory results: 10,000 results
Communication with PC: USB interface
Power: Built-in battery 2000 mAh, 2.4V
Working time: no less than 15 hours
Automatic shutdown: Within 90 seconds
Operating temperature range: from -10 C to +50 C.
Electronic unit size (height x width x height): 170mm x 80mm x 40mm
Converter size (length x height): 11mm x 60mmmm
Weight: 230g
